ContactRSSTwitterFacebook
Keep In Touch
Click to Home

Go To Search
PrintEmail
Inspection Information
INSPECTIONS

In accordance with the White Plains Supplemental Building Code, certain mandatory inspections are required to be performed by our department throughout the duration of a construction project. As an example, the following is a list of the minimum quantity and types of inspections required for a new single family house being constructed:

Site Preparation. To be made in conjunction with the Department of
  Public Works prior to construction to ensure that environmental protection
  provisions are in place. (example-Silt fencing etc.)

Foundation Inspection. To be made after footing trenches are
        excavated and the necessary forms erected.

Mechanical, Plumbing, Fire Protection and Electrical Inspection.
        To be made after all pipes, ducts, and wiring are in place.

Frame and Masonry Inspection. To be made after all framing,
        masonry walls, electrical, mechanical, fire stopping and bracing is in place.

Insulation Inspection. To be made after all required insulation is in place.

  Final Inspection. To be made after building is complete.

No mechanical, plumbing, fire sprinkler, or electrical installation shall be covered or concealed in any manner whatsoever without first being inspected and accepted by our department.

Each project may have unique types and quantities of inspections required dependent upon the scope of work. Please contact your assigned Inspector prior to commencing any work so the inspections required for your project are understood from the onset.

Request for Inspections. The Building Department shall act upon all
requests for inspections as soon as practicable, and generally within forty-
eight(48) hours of the initial request.

Contractor to Be Present. The contractor responsible for the work to be
inspected, or a responsible representative of the contractor, shall be present
at each mandatory inspection.